Showing all 47 results

  • Details

    RS8

    $73.86

    The RS8 is a versatile accessory designed to carry a rafter square on either your right or left side. The front face has a metal clip and a leather auxiliary loop ideal for mounting a tape measure, drill, Hultafors chisels, our clip-on accessories, and Pica pencils. In behind are two diagonal bar sheaths designed for nail and flat bars. The belt loop has a bit index for handy access to your most commonly used drill bits.

     

    Pair with an HD4 and a Waist Belt for a fantastic lightweight setup for finishing, flooring, or weekend jobs around the house.

    Add to cart
  • Details

    CT1

    $25.85

    The CT1 is our clip-on tape measure pouch designed to comfortably fit a 30′ tape measure and connect to any of our bags with metal clips or leather auxiliary loops. The clips on all of our clip-on accessories are sized to completely close over any clip or belt that’s 1-3/4″ wide or less.

    Add to cart
  • Details

    Suspenders

    $110.79$125.56

    Adjustable no-slip shoulder pads and chest strap. Strap length adjustment at all 4 corners.
    Standard size is compatible with height up to 6’-3” @ 38” waist/pant size. XL is suitable for 6’-4” at 39” waist/pant size and up.
    (Any excessive strap length is expected to be cut down to a reasonable length by the customer.)

     

    * If you plan to use these suspenders with an Akribis modular set up, select the “Add 2″ Suspender Mounts” option below to make them compatible.

     

    * If you want or need a 3 point system, simply cut off one of the rear suspender straps.

    Select options
  • A simple, sturdy, and handsome leather belt built to last. Pick up a tin of our all natural leather balm to enrich and protect your belt and all Akribis leather products.

    Select options
  •  

    Standard: 2” x 48”
    Large: 2” x 54”

    Select options
  •  

    Developed with a combination quick release clip and standard buckle. Set the size once with the standard buckle and then get in and out with the super clip.

    Select options
  • WATCH OUR VIDEO BELOW TO SELECT THE RIGHT BELT PAD SIZE FOR YOU. https://youtu.be/8TQ18W5rrFs

     

    Rough guide based on waist/pant size:

     

    S: 28-31
    M: 31-35
    L: 34-39
    XL: 37-44
    XXL: 42-52

     

    Fit details:
    Small belt pad
    – with standard belt will fit as small as a 28” waist/pant size
    – with super belt will fit as small as a 30” waist/pant size

     

    Medium belt pad
    – with standard belt will fit as small as a 31” waist/pant size
    – with super belt will fit as small as a 33” waist/pant size

     

    Large belt pad
    – with standard belt will fit as small as a 34” waist/pant size
    – with super belt will fit as small as a 36” waist/pant size

     

    XL belt pad
    – with standard belt will fit as small as a 37” waist/pant size
    – with super belt will fit as small as a 39” waist/pant size

     

    XXL belt pad
    -with standard belt will fit as small as 40” waist/pant size
    -with super belt will fit as small as 42” waist/pant size

     

     

    *SMALL BELT PAD RESTRICTION:
    *Please note:* if adding suspender mounts to the small belt pad no accessory will fit in the back unless modified.  There is a 4″ space in the back for this size.
    Select options
  • Details

    M7

    $70.17

    A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools.  The M7 comes with a metal tape/drill clip.

    Add to cart
  • Details

    L7

    $62.78

    A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools.  The L7 comes with a leather tape/drill strap.”

    Add to cart
  • Details

    HT

    $62.78

    Hammer Tacker auxiliary bag designed to carry a hammer tacker with 2 pencil/marker loops, knife loop, and tape/drill clip. The HT is designed with two mounting options: Remove the two Chicago Screws to loop the HT onto a 2″ belt or use the clip to mount onto a belt or loop 1-3/4″ wide. Our leather Auxiliary Loops are designed to carry clip-on accessories like the HT.

    Add to cart
  • Dimensions: 2.5″ x 1” opening, 3” deep.

    Weight: 5oz.

    Add to cart
  • Our spacer clips are designed to slide onto our modular belts, they all integrate with our Suspender Mounts, and give one more spot where you can hang any tool with integrated hook. The most common location for Spacer Clips is the center-back, however, they can be placed wherever you have adequate room on your belt.

    • NOTE: Spacer Clips are sold individually in either a Small, Medium, or Large size. They are not sold as a set.

     

    Select options
  • Details

    BD1

    $22.16

    An add-on diagonal bar sheath ideal for nail pullers, glazing bars and various pry bars. Sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommended angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

    Add to cart
  • Details

    HD1

    $22.16

    An add-on diagonal hammer sheath sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommend angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

    Add to cart
  • Details

    HD4

    $51.70

    A diagonal hammer, knife, pencil and tape clip accessory with a loop that will fit over any 2” or smaller belt.

    Select options
  •  

    Combination aux hammer/knife loop. Compatible with any 2” belts.

    Add to cart
  •  

    Combination aux hammer/knife loop. Compatible with any 2” belts.

    Add to cart
  • Replacement stainless steel hammer loops sized for our Mini Bags. Choose a High or Low loop setting for where you prefer your hammer to sit.

    Select options
  • Replacement stainless steel hammer loops sized for our standard sized bags. Choose a High or Low loop setting for where you prefer your hammer to sit.

    Select options
  • Details

    Hook

    $14.77

    Stainless steel hook, compatible with any R series bag.

    Add to cart
  • Stainless steel hook, compatible with any 2” belt and designed to sit at 90% from the body to ensure ease of use.

    Add to cart
  • Details

    H2

    $44.32

    This is a 2” belt mount hammer and chisel sheath combo.

    Add to cart
  • Details

    CR1

    $25.85

    Clip on rasp sheath.

    Add to cart
  • Details

    Phone Holders

    $25.85$29.54

    Fits any phone or calculator up to 3.5” x 6.25” x ⅝”.

    Phone Clip is designed to fit onto the Auxiliary Loop on L-series (Left Side) bags. Clip will only lock over a belt up to 1.5 inches. ** Clip will not close over a 2” belt.

    Phone Suspender is designed to be mounted onto the 1″ chest strap of our Suspenders.

    Phone Belt is designed to be mounted onto our 2” belt.

    Weight: 5 ounces

    Select options
  • 2.5″ x 1” opening with 4” depth designed to accommodate a vast quantity of finishing nails. Square bottom, 11 ounce leather backing for extra durability and fibreglass rod to keep square opening.  Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.

    Add to cart
  • 1 x 2.5” opening with 4” depth designed to accommodate a vast quantity of finishing nails. Square bottom, 11 ounce leather backing for extra durability and fibreglass rod to keep square opening. Compatible with any 3” belt and designed to fit over the buckle of the Akribis Trimmer belt.

    Add to cart
  • Choose from 3″ x 1 1/4” opening or 3 1/2″ x 1 1/4” opening, each with 30 degree bottom. Designed to fit up to 10 sticks of 28 – 34 degree 3 1/4” long spiker nails. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening. Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.

    **3″option will not fit 21 degree 3.25” stick nails.

    Select options
  • Choose 3″ x 1 1/4″ opening  or 3 1/2″ x 1 1/4” opening with 30 degree bottom. Designed to fit up to 10 sticks of spiker nails with 30% bottom to accommodate the angle of nails. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening.  Compatible with any 2” belts.

    * 3″ option will not fit 21 degree 3.25” stick nails.

    Select options
  • Tape clip on pocket tab with one interior pencil loop.

    Add to cart
  • Two 11 ounce leather loops with D ring and drill clip to get drill up front and up high. Built specifically for belt pad and suspenders.

    Add to cart
  • Two leather loops with D ring and drill clip to get drill up front and up high. Built specifically for belt pad and suspenders. Weight: 2oz

    Add to cart
  • Four leather loops with D rings.

    Weight: 11oz (total)

    Add to cart
  • 2 pencil slots, one utility clip. Fits Akribis Leather 1” suspender straps on top of halter square. 

    Add to cart
  • Our Suspender Tool Loops are built to carry heavier tools, taking the weight off of your tool bags and placing it directly onto your shoulders (if wearing suspenders). The loops are designed to fit truss hooks typically installed on tools like nailers or cordless circular saws. This avoids damaging your tool bags, bending them out of shape and also provides a convenient and safe location for these tools when working from ladders, scaffolding, or on roofs.

    Add to cart
  • 7” small handles for Stitched in Place sets and 9” regular handles for Modular Looped sets. Trimmer and Framer would need to be ordered with attached suspender mounts to be compatible. Weight: 2oz

    Select options
  • Details

    LS

    $14.77$62.78

    LS bags are not intended to be standalone fastener bags. They are designed and intended to be a replaceable outer bag option for the vast majority of our primary fastener bags. They connect to the primary fastener bags with Chicago screws making it easy to change your outer bags to suit your work or replace a bag if it’s damaged or worn out.

    *3 sets of Chicago screws included.

    Note: LS bags do not come with a primary fastener bag. 

    Select options
  • Details

    LS+

    $40.62$77.55

    LS+ bags are not intended to be standalone fastener bags. The LS+ series of outer bags feature a micro square slot. They are designed and intended to be a replaceable outer bag option for the vast majority of our primary fastener bags. They connect to the primary fastener bags with Chicago screws making it easy to change your outer bags to suit your work or replace a bag if it’s damaged or worn out.

    *3 sets of Chicago screws included.

    Note: LS+ bags do not come with a primary fastener bag. 

    Select options
  • AddOn clip is ideal for hanging cordless tools with integrated hooks or tape measure. The clip can be placed on the outer bag of your setup.

    Please specify in the comments on which outer bag you would like your AddOn clip installed. If you do not specify the location, we will send you the clip, along with Chicago screws, so you can attach the clip yourself. Clips requested on any other location other than on outer bags will be sent loose with fasteners for you to install yourself.

    Add to cart
  • Set of four pairs of Chicago screws ideal for simple repairs, replacing any damaged screws, attaching diagonal sheaths or outer bags. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

     

    Add to cart
  • 5” long leather loop with 3 D rings for hanging tools. Compatible with any 2” belts.

    Add to cart
  • Details

    Mason Sleeves

    $18.47$73.86

    Leather sleeves fit a decorative 500ml wide mouth mason jar perfectly. Single mason sleeves, or purchase a set of 5 and save.

    Select options
  • The Akribis Leather Balm is a high end leather conditioner designed to increase the life, look and feel of your tool belt. It’s safe to apply by hand and can be used on all your leather products including work boots, leisure foot wear, travel bags and jackets.

    It comes in a 2 oz metal tin and is our suggested preventative maintenance to increased weather protection, cracking in harsh climates and restored the look and feel of your well used tool belt for years to come.

    Add to cart
  • 3 quality stickers. The sticker pack comes with one laser cut window decal and 2 standard black background stickers

    Add to cart
  • Black Baseball Snapback with Akribis icon in white stitching on the front and full logo on the site.

    Add to cart
  • Dimensions: 3.75″ wide

    Add to cart
  • Grey Flat-brim Trucker hat with full Akribis logo in black stitching on the front.

    Add to cart
  • Details

    Gift Card

    $18.47$184.65

    Shopping for someone else and you’re not sure what to get them? A Gift Card is great way to give them the opportunity to pick exactly what they want from Akribis.

     

    ***Please note: Gift cards are automatically sent to the recipient’s email upon purchase with a downloadable, printable PDF version of the gift card attached. If you’d prefer to not send an email confirmation to the person you’re purchasing the gift card for, please leave the recipient email blank or add in your own email address so you can deliver the gift card yourself.

    Select amount

Here's the Breakdown.

Choose your preferred currency

Here’s what you can expect for average shipping cost on small to large orders. You are responsible for duty and taxes for all international orders. You are responsible for any fees on refunds.

Canada: $15-30
US: $25-50
International: $50-120

Leather Toolbelt Illustration


Cart Breakdown: