Modular Looped.

Looped bags are versatile, interchangeable, durable, and compatible with any 2” belt. Pick the bags and accessories that best suit your needs and build the perfect tool belt to maximize your efficiency.

Right Side.

Modular Looped Right Side Bags

Left Side.

Modular Looped Left Side Bags

Aux Bags.

Modular Looped Rear Bags

Accessories.

Modular Looped Accessories
Details

RS8

$72.64

The RS8 is a versatile accessory designed to carry a rafter square on either your right or left side. The front face has a metal clip and a leather auxiliary loop ideal for mounting a tape measure, drill, Hultafors chisels, our clip-on accessories, and Pica pencils. In behind are two diagonal bar sheaths designed for nail and flat bars. The belt loop has a bit index for handy access to your most commonly used drill bits.

 

Pair with an HD4 and a Waist Belt for a fantastic lightweight setup for finishing, flooring, or weekend jobs around the house.

Add to cart
Details

R1HB

$101.70

One outer bag, 2 pencils and 1 marker front right, hammer/knife back right, interior plier slot and 2 aux loops.

Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot.  That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

 

Details

R1HB+

$119.86

One outer bag, 2 pencils and 1 marker front right, hammer/knife back right, interior plier slot and 2 aux loops, interior divider.

Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot.  That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

 

 

One outer bag, 2 pencils and 1 marker front right, hideaway tool hook, drill clip, hammer/knife back right, 6 interior aux loops with divider, high bit index.

Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

Details

R1HBmini

$101.70$116.22

 

3 bit index and forward clip, pencil loop outer front side, high rear metal hammer loop, forward facing hideaway hook, 3 interior plier/knife loops, 2 interior pencil loops

Our mini bags are defaulted to a high hammer loop because the bags are geared towards finishing work. Having your tools hang higher and out of the way makes them less likely to damage surfaces.

Details

R1HBD+

$134.38

 

One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hammer/knife back right, interior plier slot and 2 aux loops, interior divider.

Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

 

One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hideaway tool hook, drill clip, hammer/knife back right, 6 interior aux loops with divider, high bit index.

Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

 

One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hideaway tool hook, drill clip, combination level, 4 fold ruler and drill clip back right, 6 interior aux loops with divider, high bit index.

 

Details

R1HDmini

$101.70$116.22

 

3 bit index and forward clip, pencil loop outer front side, diagonal hammer sheath, rear facing hideaway hook, outer rear auxiliary loop for clip on accessories, 3 interior plier/knife loops, 2 interior pencil loops

Details

ET (Electrical Trim)

$72.64$90.80

Introducing our new Electrical Trim bag.  This is the first in our coming line up of Electrician bags.  We’ve spent hours testing back and forth with our community of electricians to land on this layout and design. This is a great option for a right side electrician bag that can be paired up with our left side bags or aux bags as well as the rest of our line up of accessories (belts, pads, suspenders etc).  A diagonal hammer sheath can also be added for a minimal cost.

Details

ES

$134.38

A dominant side electrical bag designed to carry the essentials for most jobs. 4 plier loops (3 interior and one outer), 5 driver loops (3 interior and 2 outer pass throughs), stripper loop, 5 bit loops, 2 channel lock loops, knife loop, sharpie loop, tape chain, drill & tape clips.

Has enough interior space for other items such as a voltage tester, torpedo level, etc.

3 outer front right pencil loops and drill clip, 2 outer open ended screwdriver loops and auxiliary pocket, diagonal hammer sheath, 2 outer channel lock loops, one outer bag, rear hide away hook, 2 interior knife sheaths, 6 slot driver index, wire stripper sleeve, 2 plier loops and small auxiliary loop, high bit index.

Details

D1-HB

$116.22$130.75

3 bit index and forward clip, pencil loop outer front side, rear high metal hammer hammer loop, drill clip on outer bag, rear facing hideaway hook, rear facing jab saw sheath, outer rear auxiliary loop for clip on accessories, 3 interior plier/knife loops, 2 interior pencil loops.

Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

Details

D1-HD

$116.22$130.75

3 bit index and forward clip, pencil loop outer front side, diagonal hammer sheath, drill clip on outer bag, rear facing hideaway hook, rear facing jab saw sheath, outer rear auxiliary loop for clip on accessories, 3 interior plier/knife loops, 2 interior pencil loops.

Details

HD4

$50.85

A diagonal hammer, knife, pencil and tape clip accessory with a loop that will fit over any 2” or smaller belt.

Details

Gift Card

$18.16$181.60

Shopping for someone else and you’re not sure what to get them? A Gift Card is great way to give them the opportunity to pick exactly what they want from Akribis.

 

***Please note: Gift cards are automatically sent to the recipient’s email upon purchase with a downloadable, printable PDF version of the gift card attached. If you’d prefer to not send an email confirmation to the person you’re purchasing the gift card for, please leave the recipient email blank or add in your own email address so you can deliver the gift card yourself.

Login to Purchase
Details

RS8

$72.64

The RS8 is a versatile accessory designed to carry a rafter square on either your right or left side. The front face has a metal clip and a leather auxiliary loop ideal for mounting a tape measure, drill, Hultafors chisels, our clip-on accessories, and Pica pencils. In behind are two diagonal bar sheaths designed for nail and flat bars. The belt loop has a bit index for handy access to your most commonly used drill bits.

 

Pair with an HD4 and a Waist Belt for a fantastic lightweight setup for finishing, flooring, or weekend jobs around the house.

Add to cart
Details

L-Mini

$83.54$141.65

Lightweight fastener bag intended for finishing or light framing. Includes a 4 slot high bit index, outer front punch/pencil loop, 2 diagonal nail puller/flat bar sheaths, 7” rafter square slot, outer rear auxiliary loop for clip on accessories, 2 interior punch/long bit loops. Choose your preferred outer LS bag to complete your ideal L-Mini.

5” long micro square slot can be added below for extra cost.

Details

LT

$90.80$148.91

The LT is a high capacity primary fastener bag. Includes a front tape pouch, diagonal nail bar sheath, rafter square slot, rear aux loop, interior stick nail sheath, 2 interior aux loops, and a high bit index. Choose your preferred outer LS bag to complete your ideal LT.

Details

LT-Max

$116.22$174.34

The LT-Max offers added fastener organization. Includes a tape pouch at the front, diagonal nail bar sheath, rafter square slot, rear aux loop, 6 interior aux loops with divider, and a high bit index. Choose your preferred outer LS bag to complete your ideal LT Max.

Details

SLT

$105.33$163.44

The SLT is a streamlined primary fastener bag. Includes a high forward facing tape pocket with 2 slot bit index on the tab, 2 tier outer front auxiliary loop/pocket, standard 7” rafter square sheath, diagonal nail puller/flat bar sheath, outer rear facing auxiliary loop, 1 diagonal forward punch/bit loops, interior stick nail sheath. Choose your preferred outer LS bag to complete your ideal SLT.

Details

SLT-Max

$130.75$188.86

The SLT-Max is a streamlined fastener bag with added organization. Includes a high forward tape pocket with 2 slot bit index on the tab, 2 tier outer front auxiliary loop/pocket, standard 7” rafter square sheath, diagonal nail puller/flat bar sheath, outer rear facing auxiliary loop, 1 diagonal forward punch/bit loop, interior divider with one large and 2 small aux loops toward the back. Choose your preferred outer LS bag to complete your ideal SLT-Max.

Details

L2

$112.59

The L2 is versatile fastener bag with great storage and functionality. Includes front and back diagonal nail bar sheaths, 2 outer bags with hide away hook compatibility, 2 interior auxiliary loops, 4 slot interior bit index (two 2” deep, two 4” deep), high bit index, and a dedicated 7” rafter square slot. 

Add to cart
Details

L4

$138.02

The L4 is designed to be a maximum capacity fastener bag. Includes front and back diagonal nail bar sheaths, 4 outer bags with hide away hook compatibility, 2 interior auxiliary loops, 4 slot interior bit index (two 2” deep, two 4” deep), high bit index, and a dedicated 7” rafter square slot.

Details

ET (Electrical Trim)

$72.64$90.80

Introducing our new Electrical Trim bag.  This is the first in our coming line up of Electrician bags.  We’ve spent hours testing back and forth with our community of electricians to land on this layout and design. This is a great option for a right side electrician bag that can be paired up with our left side bags or aux bags as well as the rest of our line up of accessories (belts, pads, suspenders etc).  A diagonal hammer sheath can also be added for a minimal cost.

Details

RS8

$72.64

The RS8 is a versatile accessory designed to carry a rafter square on either your right or left side. The front face has a metal clip and a leather auxiliary loop ideal for mounting a tape measure, drill, Hultafors chisels, our clip-on accessories, and Pica pencils. In behind are two diagonal bar sheaths designed for nail and flat bars. The belt loop has a bit index for handy access to your most commonly used drill bits.

 

Pair with an HD4 and a Waist Belt for a fantastic lightweight setup for finishing, flooring, or weekend jobs around the house.

Add to cart
Details

ET (Electrical Trim)

$72.64$90.80

Introducing our new Electrical Trim bag.  This is the first in our coming line up of Electrician bags.  We’ve spent hours testing back and forth with our community of electricians to land on this layout and design. This is a great option for a right side electrician bag that can be paired up with our left side bags or aux bags as well as the rest of our line up of accessories (belts, pads, suspenders etc).  A diagonal hammer sheath can also be added for a minimal cost.

Details

A-Max

$50.85

The A-Max is the cornerstone of our auxiliary bag system. It is designed to function as a right or left side bag, making it as versatile as you need it to be. On it’s own it is a lightweight, minimalistic fastener bag with front and rear aux loops for clip-on accessories. There’s a removable fibre glass rod sewn into the hem to maintain consistent shape and to offer a rafter square slot when paired with an LS bag. Combining it with our LS outer bags, other auxiliary bags, and accessories enables a surprising level of customization.

 

The versatility of the A-Max allows you to assemble a custom tool belt yourself that can change as you need it to on the job. All of our clip-on accessories and LS outer bags are compatible with the A-Max. You simply add your preferred components to your order and then attach them yourself. Chicago screws are provided with each component that requires them. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

 

NOTE: The A-Max does not come with any of the additional products shown in the photos. 

Add to cart

Extra small aux bag sized for a tape measure up to 35’.

Add to cart

Extra small aux bag sizes for a tape measure up to 35’ A1mini + also features a 4 bit index and a larger loop to fit over a super belt buckle or 3” belt.

Add to cart
Details

A1S

$25.42

 

Small aux bag

Add to cart
Details

A1T

$39.95

Tall auxiliary bag designed to carry longer fasteners and hardware like bolts, structural screws, strips of “Quick Drive” screws, and concrete form ties. The inside depth of the bag is 10.5″.

Add to cart
Details

A1

$29.06

 

Standard size aux bag

Add to cart
Details

A2

$47.22

Stacked aux bags

Add to cart

The HR-A1S is a smaller single auxiliary fastener bag with two D-Rings sewn into the bottom to clip tool lanyards. The HR-A1S is sized for fasteners, chalk line or a tape measure.

Add to cart
Details

HR-A1

$36.32

The HR-A1 is a single auxiliary fastener bag with two D-Rings sewn into the bottom to clip tool lanyards.

Add to cart
Details

HR-A2

$61.74

The HR-A2 is a double auxiliary fastener bag with four D-Rings sewn into the bottom to clip tool lanyards.

Add to cart
Details

M7

$69.01

A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools.  The M7 comes with a metal tape/drill clip.

Add to cart
Details

L7

$61.74

A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools.  The L7 comes with a leather tape/drill strap.”

Add to cart
Details

HT

$61.74

Hammer Tacker auxiliary bag designed to carry a hammer tacker with 2 pencil/marker loops, knife loop, and tape/drill clip. The HT is designed with two mounting options: Remove the two Chicago Screws to loop the HT onto a 2″ belt or use the clip to mount onto a belt or loop 1-3/4″ wide. Our leather Auxiliary Loops are designed to carry clip-on accessories like the HT.

Add to cart
Details

HD4

$50.85

A diagonal hammer, knife, pencil and tape clip accessory with a loop that will fit over any 2” or smaller belt.

Details

LS

$14.53$61.74

LS bags are not intended to be standalone fastener bags. They are designed and intended to be a replaceable outer bag option for the vast majority of our primary fastener bags. They connect to the primary fastener bags with Chicago screws making it easy to change your outer bags to suit your work or replace a bag if it’s damaged or worn out.

*3 sets of Chicago screws included.

Note: LS bags do not come with a primary fastener bag. 

Details

LS+

$39.95$76.27

LS+ bags are not intended to be standalone fastener bags. The LS+ series of outer bags feature a micro square slot. They are designed and intended to be a replaceable outer bag option for the vast majority of our primary fastener bags. They connect to the primary fastener bags with Chicago screws making it easy to change your outer bags to suit your work or replace a bag if it’s damaged or worn out.

*3 sets of Chicago screws included.

Note: LS+ bags do not come with a primary fastener bag. 

Part of an exciting collaboration with our friends at 1620. They make the highest quality, most technologically advanced workwear on the planet. This heavyweight work shirt is 100% sourced, cut, and sewn in the United States. On any given jobsite, temperatures and conditions can change quickly. The right t-shirt really matters. The NYCO LS Work T-shirt uses an extremely high performance knit engineered from a proprietary blend of INVISTA T420 nylon and cotton, CORDURA® Baselayer fabric & is 4x more abrasion resistant than 100% cotton. It’s comfortable and versatile in all climates, absorbs moisture quickly & won’t melt or drip like polyester. We recommend reviewing the size chart in the photo gallery for your ideal fit.

Part of an exciting collaboration with our friends at 1620. They make the highest quality, most technologically advanced workwear on the planet. This heavyweight work shirt is 100% sourced, cut, and sewn in the United States. The Basic Work Hoodie is built with 1620’s heavyweight fleece fabric and features YKK mil-spec snaps, a helmet compatible hood, and a longer fit. Inspired by military BDUs, 1620 designed this heavyweight fleece work sweatshirt to be the new standard on any jobsite, with maximum versatility and comfort. We recommend looking at the sizing chart in the photo gallery to find your best fit.

Details

RS8

$72.64

The RS8 is a versatile accessory designed to carry a rafter square on either your right or left side. The front face has a metal clip and a leather auxiliary loop ideal for mounting a tape measure, drill, Hultafors chisels, our clip-on accessories, and Pica pencils. In behind are two diagonal bar sheaths designed for nail and flat bars. The belt loop has a bit index for handy access to your most commonly used drill bits.

 

Pair with an HD4 and a Waist Belt for a fantastic lightweight setup for finishing, flooring, or weekend jobs around the house.

Add to cart

Part of an exciting collaboration with our friends at 1620. They make the highest quality, most technologically advanced workwear on the planet. This work shirt is 100% sourced, cut, and sewn in the United States. With all the comfort of cotton and the durability of CORDURA® 6,6 nylon, the NYCO Work T-Shirt is a core part of any arsenal. Crafted for lasting performance and built with an antimicrobial and wicking finish, this work tee can keep up on any jobsite. This work shirt is designed for plenty of room in the chest and shoulders. We recommend reviewing the size chart in the photo gallery for your ideal fit.

Details

CT1

$25.42

The CT1 is our clip-on tape measure pouch designed to comfortably fit a 30′ tape measure and connect to any of our bags with metal clips or leather auxiliary loops. The clips on all of our clip-on accessories are sized to completely close over any clip or belt that’s 1-3/4″ wide or less.

Add to cart
Details

Suspenders

$108.96$123.49

Adjustable no-slip shoulder pads and chest strap. Strap length adjustment at all 4 corners.
Standard size is compatible with height up to 6’-3” @ 38” waist/pant size. XL is suitable for 6’-4” at 39” waist/pant size and up.
(Any excessive strap length is expected to be cut down to a reasonable length by the customer.)

 

* If you plan to use these suspenders with an Akribis modular set up, select the “Add 2″ Suspender Mounts” option below to make them compatible.

 

* If you want or need a 3 point system, simply cut off one of the rear suspender straps.

A simple, sturdy, and handsome leather belt built to last. Pick up a tin of our all natural leather balm to enrich and protect your belt and all Akribis leather products.

 

Standard: 2” x 48”
Large: 2” x 54”

 

Developed with a combination quick release clip and standard buckle. Set the size once with the standard buckle and then get in and out with the super clip.

WATCH OUR VIDEO BELOW TO SELECT THE RIGHT BELT PAD SIZE FOR YOU. https://youtu.be/8TQ18W5rrFs

 

Rough guide based on waist/pant size:

 

S: 28-31
M: 31-35
L: 34-39
XL: 37-44
XXL: 42-52

 

Fit details:
Small belt pad
– with standard belt will fit as small as a 28” waist/pant size
– with super belt will fit as small as a 30” waist/pant size

 

Medium belt pad
– with standard belt will fit as small as a 31” waist/pant size
– with super belt will fit as small as a 33” waist/pant size

 

Large belt pad
– with standard belt will fit as small as a 34” waist/pant size
– with super belt will fit as small as a 36” waist/pant size

 

XL belt pad
– with standard belt will fit as small as a 37” waist/pant size
– with super belt will fit as small as a 39” waist/pant size

 

XXL belt pad
-with standard belt will fit as small as 40” waist/pant size
-with super belt will fit as small as 42” waist/pant size

 

 

*SMALL BELT PAD RESTRICTION:
*Please note:* if adding suspender mounts to the small belt pad no accessory will fit in the back unless modified.  There is a 4″ space in the back for this size.
Details

M7

$69.01

A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools.  The M7 comes with a metal tape/drill clip.

Add to cart
Details

L7

$61.74

A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools.  The L7 comes with a leather tape/drill strap.”

Add to cart
Details

HT

$61.74

Hammer Tacker auxiliary bag designed to carry a hammer tacker with 2 pencil/marker loops, knife loop, and tape/drill clip. The HT is designed with two mounting options: Remove the two Chicago Screws to loop the HT onto a 2″ belt or use the clip to mount onto a belt or loop 1-3/4″ wide. Our leather Auxiliary Loops are designed to carry clip-on accessories like the HT.

Add to cart

Dimensions: 2.5″ x 1” opening, 3” deep.

Weight: 5oz.

Add to cart

Our spacer clips are designed to slide onto our modular belts, they all integrate with our Suspender Mounts, and give one more spot where you can hang any tool with integrated hook. The most common location for Spacer Clips is the center-back, however, they can be placed wherever you have adequate room on your belt.

  • NOTE: Spacer Clips are sold individually in either a Small, Medium, or Large size. They are not sold as a set.

 

Details

BD1

$21.79

An add-on diagonal bar sheath ideal for nail pullers, glazing bars and various pry bars. Sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommended angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

Add to cart
Details

HD1

$21.79

An add-on diagonal hammer sheath sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommend angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

Add to cart
Details

HD4

$50.85

A diagonal hammer, knife, pencil and tape clip accessory with a loop that will fit over any 2” or smaller belt.

 

Combination aux hammer/knife loop. Compatible with any 2” belts.

Add to cart

 

Combination aux hammer/knife loop. Compatible with any 2” belts.

Add to cart

Replacement stainless steel hammer loops sized for our Mini Bags. Choose a High or Low loop setting for where you prefer your hammer to sit.

Replacement stainless steel hammer loops sized for our standard sized bags. Choose a High or Low loop setting for where you prefer your hammer to sit.

Details

Hook

$14.53

Stainless steel hook, compatible with any R series bag.

Add to cart

Stainless steel hook, compatible with any 2” belt and designed to sit at 90% from the body to ensure ease of use.

Add to cart
Details

H2

$43.58

This is a 2” belt mount hammer and chisel sheath combo.

Add to cart
Details

CR1

$25.42

Clip on rasp sheath.

Add to cart
Details

Phone Holders

$25.42$29.06

Fits any phone or calculator up to 3.5” x 6.25” x ⅝”.

Phone Clip is designed to fit onto the Auxiliary Loop on L-series (Left Side) bags. Clip will only lock over a belt up to 1.5 inches. ** Clip will not close over a 2” belt.

Phone Suspender is designed to be mounted onto the 1″ chest strap of our Suspenders.

Phone Belt is designed to be mounted onto our 2” belt.

Weight: 5 ounces

2.5″ x 1” opening with 4” depth designed to accommodate a vast quantity of finishing nails. Square bottom, 11 ounce leather backing for extra durability and fibreglass rod to keep square opening.  Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.

Add to cart

1 x 2.5” opening with 4” depth designed to accommodate a vast quantity of finishing nails. Square bottom, 11 ounce leather backing for extra durability and fibreglass rod to keep square opening. Compatible with any 3” belt and designed to fit over the buckle of the Akribis Trimmer belt.

Add to cart

Choose from 3″ x 1 1/4” opening or 3 1/2″ x 1 1/4” opening, each with 30 degree bottom. Designed to fit up to 10 sticks of 28 – 34 degree 3 1/4” long spiker nails. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening. Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.

**3″option will not fit 21 degree 3.25” stick nails.

Choose 3″ x 1 1/4″ opening  or 3 1/2″ x 1 1/4” opening with 30 degree bottom. Designed to fit up to 10 sticks of spiker nails with 30% bottom to accommodate the angle of nails. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening.  Compatible with any 2” belts.

* 3″ option will not fit 21 degree 3.25” stick nails.

Tape clip on pocket tab with one interior pencil loop.

Add to cart

Two 11 ounce leather loops with D ring and drill clip to get drill up front and up high. Built specifically for belt pad and suspenders.

Add to cart

Two leather loops with D ring and drill clip to get drill up front and up high. Built specifically for belt pad and suspenders. Weight: 2oz

Add to cart

Four leather loops with D rings.

Weight: 11oz (total)

Add to cart

2 pencil slots, one utility clip. Fits Akribis Leather 1” suspender straps on top of halter square. 

Add to cart

Our Suspender Tool Loops are built to carry heavier tools, taking the weight off of your tool bags and placing it directly onto your shoulders (if wearing suspenders). The loops are designed to fit truss hooks typically installed on tools like nailers or cordless circular saws. This avoids damaging your tool bags, bending them out of shape and also provides a convenient and safe location for these tools when working from ladders, scaffolding, or on roofs.

Add to cart

7” small handles for Stitched in Place sets and 9” regular handles for Modular Looped sets. Trimmer and Framer would need to be ordered with attached suspender mounts to be compatible. Weight: 2oz

Details

LS

$14.53$61.74

LS bags are not intended to be standalone fastener bags. They are designed and intended to be a replaceable outer bag option for the vast majority of our primary fastener bags. They connect to the primary fastener bags with Chicago screws making it easy to change your outer bags to suit your work or replace a bag if it’s damaged or worn out.

*3 sets of Chicago screws included.

Note: LS bags do not come with a primary fastener bag. 

Details

LS+

$39.95$76.27

LS+ bags are not intended to be standalone fastener bags. The LS+ series of outer bags feature a micro square slot. They are designed and intended to be a replaceable outer bag option for the vast majority of our primary fastener bags. They connect to the primary fastener bags with Chicago screws making it easy to change your outer bags to suit your work or replace a bag if it’s damaged or worn out.

*3 sets of Chicago screws included.

Note: LS+ bags do not come with a primary fastener bag.