Showing all 56 results
-
Adjustable no-slip shoulder pads and chest strap. Strap length adjustment at all 4 corners.
Standard size is compatible with height up to 6’-3” @ 38” waist/pant size. XL is suitable for 6’-4” at 39” waist/pant size and up.
(Any excessive strap length is expected to be cut down to a reasonable length by the customer.)* If you plan to use these suspenders with an Akribis modular set up, then you will need to purchase the suspender mounts separately.
* If you want or need a 3 point system, simply cut off one of the rear suspender straps.
-
Standard: 2” x 48”
Large: 2” x 54” -
Developed with a combination quick release clip and standard buckle. Set the size once with the standard buckle and then get in and out with the super clip.
-
WATCH OUR VIDEO BELOW TO SELECT THE RIGHT BELT PAD SIZE FOR YOU. https://youtu.be/8TQ18W5rrFs
Rough guide based on waist/pant size:
S: 28-31
M: 31-35
L: 34-39
XL: 37-44
XXL: 42-52Fit details:
Small belt pad
– with standard belt will fit as small as a 28” waist/pant size
– with super bet will fit as small as a 30” waist/pant sizeMedium belt pad
– with standard belt will fit as small as a 31” waist/pant size
– with super bet will fit as small as a 33” waist/pant sizeLarge belt pad
– with standard belt will fit as small as a 34” waist/pant size
– with super bet will fit as small as a 36” waist/pant sizeXL belt pad
– with standard belt will fit as small as a 37” waist/pant size
– with super bet will fit as small as a 39” waist/pant sizeXXL belt pad
-with standard belt will fit as small as 40” waist/pant size
-with super belt will fit as small as 42” waist/pant size*SMALL BELT PAD RESTRICTION:*Please note:* if adding suspender mounts to the small belt pad no accessory will fit in the back unless modified. There is a 4″ space in the back for this size. -
A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools. The M7 comes with a metal tape/drill clip.
-
A 2″ belt mount auxiliary bag intended to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch 2-1/4″ x 1-1/4″ x 6-1/4″ suitable for a variety of tools. The L7 comes with a leather tape/drill strap.”
-
Hammer Tacker Bag Auxiliary bag design to carry a hammer tacker with 2 pencil/marker loops, knife loop and tape/drill clip. Set up to threaded onto any 2″ or smaller belt or, to be clipped onto a belt 1-3/4 or less.
-
2.5″ x 1” opening with 3” depth designed to accommodate a vast variety of small loose fasteners and also includes a removable lid. Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.
-
Our spacer clip is designed to slide on to our modular belts and give one more spot in the back where you can hang any tool with integrated hook. Fits in the back with all our belt pads except size Small.
* Will NOT fit in the back of our SMALL BELT PADS.
-
An add-on diagonal hammer sheath sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommend angle is 38 degrees from vertical.
-
A diagonal hammer, knife, pencil and tape clip accessory with a loop that will fit over any 2” or smaller belt.
-
Combination aux hammer/knife loop. Compatible with any 2” belts.
-
Combination aux hammer/knife loop. Compatible with any 2” belts.
-
Replacement stainless steel hammer loop to raise the hammer location by 4.5″
Weight: 5oz
-
Stainless steel hook, compatible with any R series bag.
-
Stainless steel hook, compatible with any 2” belt and designed to sit at 90% from the body to ensure ease of use.
-
This is a 2” belt mount hammer and chisel sheath combo.
-
Clip on rasp sheath.
-
Designed to be mounted on 2” belt and fits any phone or calculator up to 3.5” x 6.25” x ⅝.
Weight 5 ounces
-
Designed to be mounted on 2” belt and fits any phone or calculator up to 3.5” x 6.25” x ⅝. Designed to fit 1” chest strap on Akribis suspenders.
** Will not fit 2” belt.Weight 5 ounces
-
Designed to fits any phone or calculator up to 3.5” x 6.25” x ⅝. Clip designed for the auxiliary slot on L-series bags. Clip will only lock over a belt up to 1.5 inches.
** Will not fit 2” belt.”Weight 5 ounces
-
2.5″ x 1” opening with 4” depth designed to accommodate a vast quantity of finishing nails. Square bottom, 11 ounce leather backing for extra durability and fibreglass rod to keep square opening. Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.
-
1 x 2.5” opening with 4” depth designed to accommodate a vast quantity of finishing nails. Square bottom, 11 ounce leather backing for extra durability and fibreglass rod to keep square opening. Compatible with any 3” belt and designed to fit over the buckle of the Akribis Trimmer belt.
-
3″ x 1 1/4” opening with 30 degree bottom. Designed to fit up to 10 sticks of 28 – 34 degree 3 1/4” long spiker nails. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening. Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.
-
Designed to fit up to 10 sticks of spiker nails with 30% bottom to accommodate the angle of nails. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening. Compatible with any 2” belts.
-
3 1/2″ x 1 1/4” opening with 30 degree bottom. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening. Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.
-
3 1/2″ x 1 1/4” opening with 30 degree bottom. This ensures a good fit and durable ware. 11 ounce leather backing for extra durability with fibreglass rod to keep square opening. Compatible with any 2” belts.
-
Tape clip on pocket tab with one interior pencil loop.
-
Two 11 ounce leather loops with D ring and drill clip to get drill up front and up high. Built specifically for belt pad and suspenders.
-
Two 11 ounce leather loops with D ring and drill clip to get drill up front and up high. Built specifically for belt pad and suspenders.
-
Four 11 ounce leather loops with D rings.
-
New generation suspender strap hardware.
Replace your old gen traditional buckles with these new super simple and trouble free Conway buckles. Sold as a set of 4. -
2 pencil slots, one utility clip. Fits Akribis Leather 1” suspender straps on top of halter square.
-
Our suspender loops are build to carry heavy fasteners taking the weight off of your tool bags and placing it directly on to your waist or shoulders (if wearing suspenders). This avoids damaging your tool bags and bending them out of shape.
-
7” small handles for Stitched in Place sets and 9” regular handles for Modular Looped sets. Trimmer and Framer would need to be ordered with attached suspender mounts to be compatible.
-
The LS bags are identical to the outer bags that come stock with our left side bags. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out.
3 sets of Chicago screws included.
-
The LS bags are identical to the outer bags that come stock with our left side bags. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out.
3 sets of Chicago screws included.
-
The LS bags are identical to the outer bags that come stock with our left side bags. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out.
3 sets of Chicago screws included.
-
The LS bags are identical to the outer bags that come stock with our left side bags. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out. Inner slot has been added to fit the Martinez Micro Square.
3 sets of Chicago screws included.
-
The LS bags are identical to the outer bags that come stock with our left side bags. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out. Inner slot has been added to fit the Martinez Micro Square.
3 sets of Chicago screws included.
-
The LS bags are identical to the outer bags that come stock with our left side bags. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out. Inner slot has been added to fit the Martinez Micro Square.
3 sets of Chicago screws included.
-
The HR-LS bags are identical to the outer bags that come stock with our left side HR bags. All black with 2 added D rings. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out.
3 sets of Chicago screws included.
-
The HR-LS bags are identical to the outer bags that come stock with our left side HR bags. All black with 4 added D rings. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out.
3 sets of Chicago screws included.
-
The LS bags are identical to the outer bags that come stock with our left side bags. This give the flexibility to swap out the bags on your left side to go between 1 or 2 extra bags as well as replace a bag if damaged or worn out.
3 sets of Chicago screws included.
-
The SLX bag is an outer fastener bag that features one large pocket for bulk fastest, and 2 small side by side outer bags that would fit a tape measure or small volume of fasteners nicely.
This option provides good organization and capacity without hanging down too far or being too wide.
The LSX bag is compatible with any LT or SLT bag, as well as all stitched in place belts with the exception of the “trimmer”.
Sold with Chicago screws for mounting. -
The SLX+ bag is an outer fastener bag that features one large pocket for bulk fastest as well a integrated micro square slot, and 2 small side by side outer bags that would fit a tape measure or small volume of fasteners nicely.
This option provides good organization and capacity without hanging down too far or being too wide.
The LSX+ bag is compatible with any LT or SLT bag, as well as all stitched in place belts with the exception of the “trimmer”.
Sold with Chicago screws for mounting -
AddOn clip is ideal for hanging cordless tools with integrated hooks or tape measure. The clip can be placed on the outer bag of your setup.
Please specify in the comments on which outer bag you would like your AddOn clip installed. If you do not specify the location, we will send you the clip, along with Chicago screws, so you can attach the clip yourself.
-
5” long leather loop with 3 D rings for hanging tools. Compatible with any 2” belts.
-
Fits a decorative 500ml wide mouth mason jar perfectly.
-
Fits a decorative 500ml wide mouth mason jar perfectly.
-
2 oz metal tin of Leather balm. Increase the life of your leather products.
Out of Stock
-
3 quality stickers. The sticker pack comes with one laser cut window decal and 2 standard black background stickers
-
Black Baseball Snapback with Akribis icon in white stitching on the front and full logo on the site.
-
Dimensions: 3.75″ wide
-
Grey Flat-brim Trucker with full Akribis logo in black stitching on the front.
-
Belt sales sell out within a few hours of our monthly opening every month. BUT due to popular demand we have made Gift Cards available and purchasable even while our store is closed!
This way you can still give or receive something from Akribis Leather whenever the occasion.
Here's the Breakdown.
Choose your preferred currency
Here’s what you can expect for average shipping cost on small to large orders. You are responsible for duty and taxes for all international orders. You are responsible for any fees on refunds.
Canada: $15-30
US: $25-50
International: $50-120