- Please choose product options by visiting Standard Hammer Loop.
Showing 81–96 of 120 results
-
Hammer Tacker auxiliary bag designed to carry a hammer tacker with 2 pencil/marker loops, knife loop, and tape/drill clip. The HT is designed with two mounting options: Remove the two Chicago Screws to loop the HT onto a 2″ belt or use the clip to mount onto a belt or loop 1-3/4″ wide. Our leather Auxiliary Loops are designed to carry clip-on accessories like the HT.
-
Dimensions: 2.5″ x 1” opening, 3” deep.
Weight: 5oz.
-
Our spacer clips are designed to slide onto our modular belts, they all integrate with our Suspender Mounts, and give one more spot where you can hang any tool with integrated hook. The most common location for Spacer Clips is the center-back, however, they can be placed wherever you have adequate room on your belt.
- NOTE: Spacer Clips are sold individually in either a Small, Medium, or Large size. They are not sold as a set.
-
An add-on diagonal bar sheath ideal for nail pullers, glazing bars and various pry bars. Sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommended angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.
-
An add-on diagonal hammer sheath sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommend angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.
-
A diagonal hammer, knife, pencil and tape clip accessory with a loop that will fit over any 2” or smaller belt.
-
Combination aux hammer/knife loop. Compatible with any 2” belts.
-
Combination aux hammer/knife loop. Compatible with any 2” belts.
-
Replacement stainless steel hammer loops sized for our Mini Bags. Choose a High or Low loop setting for where you prefer your hammer to sit.
-
Replacement stainless steel hammer loops sized for our standard sized bags. Choose a High or Low loop setting for where you prefer your hammer to sit.
-
Stainless steel hook, compatible with any R series bag.
-
Stainless steel hook, compatible with any 2” belt and designed to sit at 90% from the body to ensure ease of use.
-
This is a 2” belt mount hammer and chisel sheath combo.
-
Clip on rasp sheath.
-
Fits any phone or calculator up to 3.5” x 6.25” x ⅝”.
Phone Clip is designed to fit onto the Auxiliary Loop on L-series (Left Side) bags. Clip will only lock over a belt up to 1.5 inches. ** Clip will not close over a 2” belt.
Phone Suspender is designed to be mounted onto the 1″ chest strap of our Suspenders.
Phone Belt is designed to be mounted onto our 2” belt.
Weight: 5 ounces
-
2.5″ x 1” opening with 4” depth designed to accommodate a vast quantity of finishing nails. Square bottom, 11 ounce leather backing for extra durability and fibreglass rod to keep square opening. Clip designed for the auxiliary slot on L-series and mini bags. Clip will only lock over a belt up to 1.5 inches.
Here's the Breakdown.
Choose your preferred currency
Here’s what you can expect for average shipping cost on small to large orders. You are responsible for duty and taxes for all international orders. You are responsible for any fees on refunds.
Canada: $15-30
US: $25-50
International: $50-120