Showing 81–96 of 128 results

• Details

  HR-A1

  $34.74

  The HR-A1 is a single auxiliary fastener bag with two D-Rings sewn into the bottom to clip tool lanyards.

  
  Add to cart
• Details

  HR-A2

  $59.05

  The HR-A2 is a double auxiliary fastener bag with four D-Rings sewn into the bottom to clip tool lanyards.

  
  Add to cart
• Details

  Suspenders

  $104.21 – $118.10

  Strong, comfortable, and adjustable Suspenders with no-slip shoulder pads and chest strap. Precise length adjustment on all four straps.
  Standard size is compatible with height up to 6’-3” @ 38” waist/pant size. XL is suitable for 6’-4” at 39” waist/pant size and up.
  (Any excessive strap length is expected to be cut down to a reasonable length by the customer.)

   

  * If you plan to use these suspenders with an Akribis modular set up, select the “Add 2″ Suspender Mounts” option below to make them compatible.

   

  * If you want or need a 3 point system, simply cut off one of the rear suspender straps.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  Pants Belt

  $55.58

  A simple, sturdy, and handsome leather belt built to last. Pick up a tin of our all natural leather balm to enrich and protect your belt and all Akribis leather products.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  Waist Belt

  $41.68

  The belt is an essential piece of any Modular setup. Our Waist Belt is 2″ wide and comes in two size options: Standard and XL, both with a stainless steel buckle. As part of our Modular system, the Waist Belt is designed to fit all of our looped Modular bags.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  Super Belt

  $69.47

  Developed with a unique combination of a quick release clip and a standard buckle. Set the size once with the standard buckle and then get in and out quickly with the clip. The belt is an essential piece of any Modular setup. Our Super Belt is 2″ wide and comes in two size options: Standard and XL, both with a stainless steel buckle and quick release clip. As part of our Modular system, the Super Belt is designed to fit all of our looped Modular bags.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  Belt Pad

  $45.16

  Belt Pad Lengths: Small: 26″ | Medium: 29″ | Large: 32″ | XL: 35″ | XXL: 38″

   

  Two-ply leather pad that goes over our 2″ belts providing added comfort, security, and load distribution. The Belt Pad secures bags and accessories in place so they don’t slide off the belt. Please ensure you’ve taken the time to measure your waist properly so you can select the best size for you.

   

  SIZING TUTORIAL

  https://youtu.be/heQsUdNsnIw?si=StC4l8kXdodrexH7

   

  *NOTE:

  • – Belt Pads DO NOT work with any Stitched in Place Tool Belts.
  • – For those with a Waist Measurement of 32″ (not pant size) or less a small Belt Pad won’t fit with a Super Belt. You’ll need to go with a Waist Belt instead or you’ll need to order a Custom Belt.
  • – For those with a Waist Measurement of 30″ (not pant size) or less a small Belt Pad won’t fit even with a Waist Belt. You will need to order a Custom Belt.

   

  Sizing Instructions:

   

  Choosing the best Belt Pad for your needs requires three steps:

   

  1. Measure your waist. Using a flexible tape, measure around your waist where the top of your pants sit and write down your measurement.

  2. Select your belt. The Super Belt and Waist Belt each require a different amount of space between the ends of the Belt Pad. You’ll need to account for this when choosing your size.

  1. 1. Super Belt: Buckle Space: 7″ Minimum
     2. Waist Belt: Buckle Space: 5″ Minimum

  3. Subtract. Take your waist measurement and subtract the buckle space of your chosen belt. This final number is the MAXIMUM size of Belt Pad that’ll fit you. Any larger will be too big.

   

  Waist Measurement minus Buckle Space = Maximum Belt Pad Size

   

  Consider that wearing Suspenders will allow you to wear your belt a little loose, usually 1 or 2 holes from tight. If you’re planning to wear Suspenders they’ll give you a little more room between the ends of your Belt Pad.

   

  *Small Belt Pad Restriction: Small Belt Pads have the smallest space at the back, only 4″. If you’re adding Suspender Mounts to the small Belt Pad no accessory will fit in the back unless modified. The small Spacer Clip has a notch cut out for one Suspender Mount to pass through. This allows a Spacer Clip and one Suspender Mount to be used in the same space. It will mean that you’ll go from two Suspender straps in the back, to just one.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  M7

  $66.00

  An efficient and lightweight auxiliary bag designed to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch (2-1/4″ x 1-1/4″ x 6-1/4″) suitable for a variety of tools.  The M7 comes with a metal tape/drill clip.

  
  Add to cart
• Details

  L7

  $59.05

  An efficient and lightweight auxiliary bag designed to carry 2 marking tools, knife, 2 bits, tape measure or drill with a rectangular pouch (2-1/4″ x 1-1/4″ x 6-1/4″) suitable for a variety of tools. The L7 comes with a leather tape/drill strap to minimize any damage caused by contact with the bag and finished materials.

  
  Add to cart
• Details

  HT

  $59.05

  Hammer Tacker auxiliary bag designed to carry a hammer tacker with 2 pencil/marker loops, knife loop, and tape/drill clip. The HT is designed with two mounting options: Remove the two Chicago Screws to loop the HT onto a 2″ belt or use the clip to mount onto a belt or loop 1-3/4″ wide. Our leather Auxiliary Loops are designed to carry clip-on accessories like the HT.

  
  Add to cart
• Details

  Pinch Pouch

  $27.79

  Dimensions: 2.5″ x 1” opening, 3” deep.

  Weight: 5oz.

  
  Add to cart
• Details

  Spacer Clips

  $17.37 – $27.79

  Our spacer clips are designed to slide onto our modular belts, they all integrate with our Suspender Mounts, and give one more spot where you can hang any tool with integrated hook. The most common location for Spacer Clips is the center-back, however, they can be placed wherever you have adequate room on your belt. The HR Spacer Clip is our High Rise version with three D-Rings for clipping in your tools with lanyards.

  • NOTE: Spacer Clips are sold individually in either a Small, Medium, or Large size. They are not sold as a set. Suspender Mounts are not included.

   

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  BD1

  $20.84

  An add-on diagonal bar sleeve, ideal for nail pullers, glazing bars and various pry bars. Sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommended angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

  
  Add to cart
• Details

  HD1

  $20.84

  An add-on diagonal hammer sheath sent with 4 Chicago screws to be fastened yourself to any set up you have. Recommend angle is 38 degrees from vertical. Fastener adhesive like “Loctite Threadlocker Blue” must be used on Chicago screws when attaching components.

  
  Add to cart
• Details

  HD4

  $55.58

  A lightweight diagonal hammer sleeve with added locations for a utility knife, pencils and a metal clip to hang a tape measure or drill. Paired with the RS8, a Waist Belt, and other modular auxiliary options makes for a great customizable, efficient, and lightweight setup.

   

  *NOTE: Utility knife location is designed for knives like the OLFA L2 or EH1. Knives larger than these may fit but will reduce the size of the hammer sleeve, potentially causing your hammer to catch.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  Low Belt Hammer Loop

  $27.79

  Dimensions: 6-1/4″ Tall, 3-3/4″ Wide. Metal loop interior space is 2-1/8″ square. Knife slot is 2-1/8″ wide.

  Weight: 5oz

   

  
  Add to cart

Here's the Breakdown.

Choose your preferred currency

Canadian dollar - $ - CADUnited States (US) dollar - $ - USDAustralian dollar - $ - AUD

Here’s what you can expect for average shipping cost on small to large orders. You are responsible for duty and taxes for all international orders. You are responsible for any fees on refunds.

Canada: $15-30
US: $25-50
International: $50-120