Showing 49–64 of 128 results

• Details

  Framer-F

  $246.62 – $302.19

  The Framer F is a front worn tool belt (tape measure in the front) with practical features for jobs ranging from concrete work to finish carpentry. Standard features include an interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°), hideaway hook, suspender mounts, rafter square slot, two diagonal bar sleeves, and more. Choose your preferred outer bags to complete your ideal front worn Framer. Read the “Details” section for a full list of features.

   

  Note: The Framer F is 25″ long from the outside edge of left side bag to the outside edge of the right side bag. You can mark a rope or use a tape measure to wrap it around the front of your waist to see where the rear edges of the bags will end.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  Framer-R

  $246.62 – $302.19

  The Framer R is a rear worn tool belt (tape measure at the back) with practical features for jobs ranging from concrete work to finish carpentry. Standard features include an interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°), hideaway hook, suspender mounts, rafter square slot, two diagonal bar sleeves, and more. Choose your preferred outer bags to complete your ideal rear worn Framer. Read the “Details” section for a full list of features.

   

  Note: For those with a pant size 36 and larger, the bags on the Framer R sit further behind you than at your sides. The Framer R is 25″ long from the outside edge of left side bag to the outside edge of the right side bag. You can mark a rope or use a tape measure to wrap it around your back and see where the front edges of the bags will end.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  B-Max

  $323.04 – $389.03

  Designed as the ultimate front worn leather tool belt for carpenters. This feature rich setup includes a front quick release clip, suspender mounts, tool loops, drill clips, diagonal bar sleeves, hideaway hook, interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°) and so much more. Choose your left side outer bags to complete your ideal B-Max. For a complete list of features click on our “Details” section.

   

  Note: 30 or smaller pant size will impact tape location making it slightly off centre, also the front tape clip will be removed.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HB

  $97.26

  One outer bag, 2 pencils and 1 marker front right, hammer/knife back right, interior plier slot and 2 aux loops.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot.  That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

   

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HB+

  $114.63

  One outer bag, 2 pencils and 1 marker front right, hammer/knife back right, interior plier slot and 2 aux loops, interior divider.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot.  That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

   

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HB-Max

  $138.94

   

  One outer bag, 2 pencils and 1 marker front right, hideaway tool hook, drill clip, hammer/knife back right, 6 interior aux loops with divider, high bit index.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HB-Mini

  $97.26 – $111.15

  Lightweight dominant side bag ideal for renovation work, finishing, siding, and light framing.

  Bag includes a bit index and forward clip, pencil loops, rear metal hammer loop, forward facing hideaway hook, 3 interior plier/knife loops, and 2 interior pencil loops.

  A Low Metal Hammer Loop is ideal for those who prefer their hammer to sit where their hand naturally falls making drawing your hammer fast and comfortable. A High Metal Hammer Loop is ideal for those who want to reduce potential impact between their hammer and finished surfaces and the impact between your hammer handle and your leg.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HBD+

  $128.52

   

  One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hammer/knife back right, interior plier slot and 2 aux loops, interior divider.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HBD-Max

  $152.83

   

  One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hideaway tool hook, drill clip, hammer/knife back right, 6 interior aux loops with divider, high bit index.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HDL-Max

  $152.83

   

  One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hideaway tool hook, drill clip, combination level, 4 fold ruler and drill clip back right, 6 interior aux loops with divider, high bit index.

   

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  R1HD-Mini

  $97.26 – $111.15

  Lightweight dominant side bag ideal for renovation work, finishing, siding, and light framing.

  Bag includes a bit index and forward clip, pencil loop, diagonal hammer sheath, rear facing hideaway hook, outer rear auxiliary loop for clip on accessories, 3 interior plier/knife loops, and 2 interior pencil loops.

   

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  L-Mini

  $79.89 – $135.47

  Lightweight fastener bag intended for finishing or light framing. Includes a 4 slot high bit index, outer front punch/pencil loop, 2 diagonal nail puller/flat bar sheaths, 7” rafter square slot, outer rear auxiliary loop for clip on accessories, 2 interior punch/long bit loops. Choose your preferred outer LS bag to complete your ideal L-Mini.

  5” long micro square slot can be added below for extra cost.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  LT

  $86.84 – $142.41

  The LT is a high capacity primary fastener bag. Includes a front tape pouch, diagonal nail bar sheath, rafter square slot, rear aux loop, interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°), 2 interior aux loops, and a high bit index. Choose your preferred outer LS bag to complete your ideal LT.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  LT-Max

  $111.15 – $166.73

  The LT-Max offers added fastener organization. Includes a tape pouch at the front, diagonal nail bar sheath, rafter square slot, rear aux loop, 6 interior aux loops with divider, and a high bit index. Choose your preferred outer LS bag to complete your ideal LT Max.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  SLT

  $100.73 – $156.31

  The SLT is a streamlined primary fastener bag. Includes a high forward facing tape pocket with 2 slot bit index on the tab, 2 tier outer front auxiliary loop/pocket, standard 7” rafter square sheath, diagonal nail puller/flat bar sheath, outer rear facing auxiliary loop, 1 diagonal forward punch/bit loops, interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°). Choose your preferred outer LS bag to complete your ideal SLT.

  
  Select options This product has multiple variants. The options may be chosen on the product page
• Details

  SLT-Max

  $125.05 – $180.62

  The SLT-Max is a streamlined fastener bag with added organization. Includes a high forward tape pocket with 2 slot bit index on the tab, 2 tier outer front auxiliary loop/pocket, standard 7” rafter square sheath, diagonal nail puller/flat bar sheath, outer rear facing auxiliary loop, 1 diagonal forward punch/bit loop, interior divider with one large and 2 small aux loops toward the back. Choose your preferred outer LS bag to complete your ideal SLT-Max.

  
  Select options This product has multiple variants. The options may be chosen on the product page

Here's the Breakdown.

Choose your preferred currency

Canadian dollar - $ - CADUnited States (US) dollar - $ - USDAustralian dollar - $ - AUD

Here’s what you can expect for average shipping cost on small to large orders. You are responsible for duty and taxes for all international orders. You are responsible for any fees on refunds.

Canada: $15-30
US: $25-50
International: $50-120