Showing 33–48 of 119 results

• Details

  RS8

  $73.19

  The RS8 is a versatile accessory designed to carry a rafter square on either your right or left side. The front face has a metal clip and a leather auxiliary loop ideal for mounting a tape measure, drill, Hultafors chisels, our clip-on accessories, and Pica pencils. In behind are two diagonal bar sheaths designed for nail and flat bars. The belt loop has a bit index for handy access to your most commonly used drill bits.

   

  Pair with an HD4 and a Waist Belt for a fantastic lightweight setup for finishing, flooring, or weekend jobs around the house.

  
  Add to cart
• Details

  Siding Tips Magnetic Fastener Caddies

  $19.76 – $21.96

  Designed and made in Canada. These flexible caddies are made to clip on your belt, tool bag or put into a tool bag compartment to keep fasteners from breaking into little pieces. Suitable for a variety of fastener types found on the job site. Put your tacker staples, crown staples, and finish nails in your pouch without the worry of them breaking apart. There is a magnet embedded into the bottom of the caddy so that fasteners will stay put even as you move.

  
  Select options
• Details

  Swanson Speed Square Pro

  $18.30

  The Speed Square PRO is a revolutionary layout tool born out of the legacy of the original Speed Square. It’s packed full of new features and has the same reliable features you have always counted on from the Swanson Speed Square making layouts even faster and easier!

  
  Add to cart
• Details

  Laser Engraving

  $73.19

  Add the custom engraving option to your cart to laser engrave your logo, name, or other distinguishing design on:

   

  • – Outer bag(s) or
  • – Phone pouch or
  • – Mason jar

   

  Files must be sent in jpg, pdf, eps or png and preferably in black and white. Only 1 location (exceptions up to 2 location if you have purchased a right and left side bag or stitched in place rig)

   

  *very limit numbers available

  * request may be denied and refunded if submitted file and or location request does not meet our requirements and/or limitations.

   

  
  Add to cart
• Details

  Trimmer

  $208.59 – $237.87

  The Trimmer is a light and small front worn (tape at the front) all leather tool belt intended for finish carpentry. Designed for those carpenters that prioritize minimalism and convenience. Includes diagonal hammer sleeve, bit index, diagonal bar sleeve, optional suspender mounts and micro square slot, and much more. Read the “Details” section for a complete list of features.

  
  Select options
• Details

  B-Mini

  $314.72 – $373.27

  Streamlined, efficient, and lightweight front worn tool belt. The B-Mini is ideal for those looking to minimize weight without losing effectiveness. Recommended for light framing, finishing, siding, renovations, project management, and general construction.

   

  Note: 30 or smaller waist size will impact tape location making it slightly off centre, also the front tape clip will be removed.

  
  Select options
• Details

  Framer-F

  $259.82 – $318.38

  The Framer F is a front worn tool belt (tape measure in the front) with practical features for jobs ranging from concrete work to finish carpentry. Standard features include an interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°), hideaway hook, suspender mounts, rafter square slot, two diagonal bar sleeves, and more. Choose your preferred outer bags to complete your ideal front worn Framer. Read the “Details” section for a full list of features.

   

  Note: The Framer F is 25″ long from the outside edge of left side bag to the outside edge of the right side bag. You can mark a rope or use a tape measure to wrap it around the front of your waist to see where the rear edges of the bags will end.

  
  Select options
• Details

  Framer-R

  $259.82 – $318.38

  The Framer R is a rear worn tool belt (tape measure at the back) with practical features for jobs ranging from concrete work to finish carpentry. Standard features include an interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°), hideaway hook, suspender mounts, rafter square slot, two diagonal bar sleeves, and more. Choose your preferred outer bags to complete your ideal rear worn Framer. Read the “Details” section for a full list of features.

   

  Note: For those with a pant size 36 and larger, the bags on the Framer R sit further behind you than at your sides. The Framer R is 25″ long from the outside edge of left side bag to the outside edge of the right side bag. You can mark a rope or use a tape measure to wrap it around your back and see where the front edges of the bags will end.

  
  Select options
• Details

  B-Max

  $340.33 – $409.86

  Designed as the ultimate front worn leather tool belt for carpenters. This feature rich setup includes a front quick release clip, suspender mounts, tool loops, drill clips, diagonal bar sleeves, hideaway hook, interior stick nail sheath (fits up to 3 1/4” nails that are 28 to 34°) and so much more. Choose your left side outer bags to complete your ideal B-Max. For a complete list of features click on our “Details” section.

   

  Note: 30 or smaller pant size will impact tape location making it slightly off centre, also the front tape clip will be removed.

  
  Select options
• Details

  R1HB

  $102.47

  One outer bag, 2 pencils and 1 marker front right, hammer/knife back right, interior plier slot and 2 aux loops.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot.  That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

   

  
  Select options
• Details

  R1HB+

  $120.76

  One outer bag, 2 pencils and 1 marker front right, hammer/knife back right, interior plier slot and 2 aux loops, interior divider.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot.  That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

   

  
  Select options
• Details

  R1HB-Max

  $146.38

   

  One outer bag, 2 pencils and 1 marker front right, hideaway tool hook, drill clip, hammer/knife back right, 6 interior aux loops with divider, high bit index.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

  
  Select options
• Details

  R1HBmini

  $102.47 – $117.10

   

  3 bit index and forward clip, pencil loop outer front side, high rear metal hammer loop, forward facing hideaway hook, 3 interior plier/knife loops, 2 interior pencil loops

  Our mini bags are defaulted to a high hammer loop because the bags are geared towards finishing work. Having your tools hang higher and out of the way makes them less likely to damage surfaces.

  
  Select options
• Details

  R1HBD+

  $135.40

   

  One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hammer/knife back right, interior plier slot and 2 aux loops, interior divider.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

  
  Select options
• Details

  R1HBD-Max

  $161.02

   

  One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hideaway tool hook, drill clip, hammer/knife back right, 6 interior aux loops with divider, high bit index.

  Our right side bags (other than finishing bags) default to low hammer loops because they are designed to be at the ideal height for where your hand hangs. It also gives better and more efficient access to the knife slot. That said the main reasons for changing from low to high hammer loop other than preference would be typically for people with shorter arms so they can more easily reach without it impeding movement. Also, for those doing more finishing work, having your tools hang higher and out of the way makes them less likely to damage surfaces.

  
  Select options
• Details

  R1HDL-Max

  $161.02

   

  One outer bag, 2 pencils and 1 marker front right, diagonal hammer sheath, hideaway tool hook, drill clip, combination level, 4 fold ruler and drill clip back right, 6 interior aux loops with divider, high bit index.

   

  
  Select options

Here's the Breakdown.

Choose your preferred currency

Canadian dollar - $ - CADUnited States (US) dollar - $ - USDAustralian dollar - $ - AUD

Here’s what you can expect for average shipping cost on small to large orders. You are responsible for duty and taxes for all international orders. You are responsible for any fees on refunds.

Canada: $15-30
US: $25-50
International: $50-120